JFX200-2513 EX
Sektöründe öncü geniş format flatbed UV-LED baskı makinesi
JFX200-2513 modeline eklemeler yaparak geliştirilen JFX200-2513 EX baskı makinesi, geniş format flatbed UV-LED baskı teknolojisinde yeni nesili tanımlıyor. Mimaki’nin yeni 3D teknolojisi sayesinde, JFX200-2513 EX, Rasterlink 6 RIP’in yalnızca tek bir gri tonlamalı görüntü üzerinden otomatik olarak 17 katmana kadar doku oluşturabildiği 2.5D katmanlı baskıyı kullanıcılarıyla buluşturuyor. Her tonlama katmanı farklı bir şekilde işleniyor ve baskı yapılan malzemenin üzerinde çeşitli katman kalınlıklarına sahip olağanüstü gerçekçi bir derinlik yaratarak, kusursuz güzellikte dokular elde edilmesini sağlıyor. Yeni tasarlanan çapraz dizilimli baskı kafaları sayesinde, saatte 35m2’ye varan yüksek hızlı baskı modu ile renkli ve beyaz boyaların eş zamanlı basılması mümkün hale geliyor.
|
|
|
|
|
|
Yaratın…
Yapabileceğiniz uygulamaların kapsamı neredeyse sınırsızdır. Bu uygulamalardan bir seçki sunarsak:
Röprodüksiyon tablolar, arkadan aydınlatmalı grafikler, inşaat tabelaları, vitrin grafikleri, sergi grafikleri, sert ambalaj malzemeleri, lenticular ürünler (3D etkisiyle dokulu baskılar), kimlik kartları, logolar (3D), paneller, promosyon malzemeleri, hediyelik eşyalar, aksesuarlar ve daha fazlası…
Malzemeler
Mimaki JFX200-2513 EX aşağıdaki malzemelerin de arasında yer aldığı oldukça geniş bir malzeme yelpazesine baskı yapabilir:Akrilik, polikarbonat, PVC, cam, alüminyum, metal, polyester, köpük levha, polistiren, ahşap, taş
Boya tutunumunda oluşabilecek farklılıkları göz önünde bulundurmak gerekir. Her ne kadar her tür yüzeye baskı yapmak mümkün olsa da boya tutunumu malzemeye göre farklılık gösterebilir. Primer ürünümüz PR-200, malzemenin görünümünü ve dokusunu bozmadan boyanın daha iyi tutunmasını sağlamaktadır.
Teknik Özellikleri
Ürün | JFX200-2513 EX | |
---|---|---|
Baskı kafası | On-demand Piezo baskı kafası (3 adet çapraz dizilimli) | |
Baskı çözünürlüğü | 300, 450, 600, 900, 1,200dpi | |
Boya | Tip | UV-LED Kürlenmeli Boya: LH-100, LUS-120, LUS-150, LUS-350*1 Primer: |
Besleme sistemi | 1 litre Şişe / 250ml Şişe (yalnızca LH-100, LUS-120, PR-200)*3 | |
Sirkülasyon | Mimaki Sirkülasyon Teknolojisi (MCT)*4 | |
Maks. baskı boyutu | 2,500 × 1,300mm | |
Malzeme | Boyutlar | 2,500 × 1,300mm |
Yükseklik | 50mm | |
Ağırlık | 50 kg/m2 yoğunlaşmamış ağırlık | |
Malzeme vakumu | Vakum tipi | Emme bir vakum kullanılarak sabitlenmektedir |
Vakum alanları | 2 bölüm (X-ekseni yönünde) | |
UV ünitesi | Sistem | UV-LED sistemi |
Standart çalışma ömrü | 5,000 saatin üzerinde*5 | |
Uyumlu standartlar | VCCI (A Sınıfı), CE Belgesi, CB Raporu, UL Belgesi, RoHS, UL 60950-1, FCC (A Sınıfı) | |
Arayüz | USB 2.0, Ethernet 1000BASE-T | |
Güç kaynağı | AC 200–240V ±10% 50/60Hz ±1Hz, 12A veya daha az | |
Güç tüketimi | 2.88Kva veya daha az | |
Çalışma ortamı | Sıcaklık | 20 ~ 30°C |
Nem | %35 ~ 65Rh (Yoğuşmasız) | |
Hassas çalışma sıcaklığı | 20 ~ 25°C | |
Sıcaklık değişim aralığı | Saatte ± 10°C aralığında | |
Toz | Standart ofis ortamıyla eş değer | |
Boyutlar (E x B x Y) | 4,400 × 2,450 × 1,250mm | |
Ağırlık | 650kg |
*1 LUS-350 boya desteği daha sonra etkin olacaktır.
*2 PR-200, LUS-350 boya kullanımı ile uyumlu değildir.
*3 İlk boya dolumu için 1 litrelik boya şişeler gerekmektedir.
*4 MCT (Mimaki Sirkülasyon Teknolojisi) yalnızca beyaz boya ile çalışmaktadır.
*5 Belirtilen standart çalışma ömrü süreleri tahmini olup garantisi bulunmamaktadır.
Sarf Malzemeleri
Ürün | Renk | Açıklamalar |
---|---|---|
LH-100 | Cyan, Magenta, Yellow, Black, White, Clear | 250 ml şişe & 1,000 ml şişe |
LUS-120 | Cyan, Magenta, Yellow, Black, White, Clear | 250 ml şişe & 1,000 ml şişe |
LUS-150 | Cyan, Magenta, Yellow, Black, White, Clear*1 | 1,000 ml şişe |
LUS-350 | Cyan, Magenta, Yellow, Black, White, Clear | 1,000 ml şişe |
PR-200 | Primer | 250 ml şişe & 1,000 ml şişe |
FL007 | Flushing liquid 07 (Yıkama Sıvısı) | 1,000 ml şişe |
*1 LUS-150 boyalar için lak boya mevcut değildir. Ancak LH-100 lak boya, LUS-150 boyalarla kombinasyon halinde kullanılabilir.
Features of JFX200-2513 EX
Building on the success of the JFX200-2513, the new JFX200-2513 EX defines the next-generation in large flatbed LED UV printing. Thanks to our new 3D print technology, the JFX200-2513 EX introduces 2.5D layered printing where our RIP Rasterlink6 PLUS automatically creates up to 17 layers based on just one grey-scale image. Each gradation layer is processed differently, creating an amazing realistic depth with varied layer thicknesses on the printed media, resulting in seamless beautiful textures. With a high speed mode of 35m2/h, the newly designed staggered heads carriage allow simultaneous print of colour and white.
Print speed
Compared to the JFX200-2513:
- Print speed is twice as fast at every print mode
- Plus, the JFX-2513 EX introduces a new high speed print mode of 35sqm/h
New 2.5D printing technology
Easy 2.5D creations are now possible in just a few clicks for everyone using the RasterLink6 PLUS RIP
- Forms relief texture on any print material
- Bridges the gap between 2D and 3D applications
Improved usability
Foot switch
- A foot pedal is installed at the front of the printer for easy turning ON/OFF the vacuum power without having to access the control panels
- Vacuum units can be switched on/off via the control panel
- Vacuum area is divided in X direction and can be set depending on the media size
- Optional stronger vacuum unit also available
Ethernet connection
- In addition to the USB2.0 connection, an Ethernet connection is also available on the new JFX200-2513 EX
- It provides convenience by allowing to connect several printers with only one computer
- Installation is done simply by plugging cables into the network
Event email
- For remote status indication of the printer, the printer status can be sent from the printer to a PC or mobile phone via the Internet
IOT automation
- MDL commands* are used to embed Mimaki printers with the unattended on-demand production lines from customer production systems and peripheral equipment, enabling easy integration with automation systems on the production floor
- Utilisation of the MDL commands controls the position and height of the print head and the operation of the printer, such as the start of printing
External safety I/F
- In addition to the standard emergency switch, an external safety I/F allows for the external connection of a wide variety of safety applications* such as safety light curtains, etc.
Enhanced uninterrupted printing
Non-stop printing with automatic maintenance
- NCU (Nozzle Check Unit) automatically checks the nozzle condition
- When missing nozzles are detected, they will be automatically cleaned
- If still missing after cleaning, the NRS (Nozzle Recovery System) will automatically replace with working nozzles, so there is no need to wait for a service intervention
Advanced LED-UV curing unit
150% higher luminance
- In comparison to previous models, the newly designed LED-UV unit provides up to 150% higher luminance levels
- It results in an even more stable and faster curing of LED UV inks
Less VOC
- Little VOC (volatile organic compound), no ozone production
- With less odour, no special “expensive” ventilation systems are required
Energy efficient
- Generates less heat and turns on only when needed
- Less power consumption, therefore reduced running costs
Less heat impact
- With low temperature LED-UV lamps, the temperature does not exceed 30⁰C, enabling prints on cheaper and heat sensitive media, as well as media deformation (often caused by metal halide lamps which reach temperatures up to 70⁰C)
Less downtime
- Long-life LED-UV lamps require less maintenance
- The lifetime of LED-UV lamps is approx. 5000 hours (lifetime of metal halide lamps is approx. 350-700 hours)
MCC (Mimaki Clear Control)
Beautiful clear ink printing
- Using MCC, a high quality gloss finish is achieved due to greater image quality control and less dust attachment
LED-UV primer
Primer PR-200
- PR-200 dramatically improves the adhesion when printing with colour inks
- Primer can be applied to the area where it is needed
- Effective and economical use of primer retains look and feel of the media
MCT: Mimaki Circulation System
- Prevents settlement of white ink pigments
- Ensures a constant optimal ink supply
- Reduces the amount of waste ink
- MCT works only when the white ink set is installed
Image quality control
MAPS (Mimaki Advanced Pass System) for printing without banding
- MAPS eliminates banding by dispersing ink drops between the passes
- This technology improves the print quality when printing in high productivity modes, and reduces uneven print density of solid colour areas
- By printing in auto-mode in MAPS, the condition of MAPS is automatically selected for each print mode
- Using MAPS does not change the print speed
- The optimum setting condition varies depending on print data or media. Be sure to test the image quality beforehand
Variable Dot Technology: reduces grainy appearance
- Variable Dot Technology enables the printer to print in 3 different dot sizes (small, medium and large) to create high quality images with smooth gradations
- Variable Dot Printing uses smaller drops to produce smoother gradations, while bigger drops create uniform solid colours
- By producing dots in three different sizes, high resolution graphics are created without a grainy appearance, even at high speed and in low resolution mode
Waveform Control to achieve precise placement of ink droplets
- The dots are optimized by tuning the frequency depending on ink’s viscosity to accurately place and shape individual ink droplets
- This results in sharper lines, text and optimized image even at lower resolution
Mimaki LED-UV inks LH-100, LUS-120 and LUS-150 are GREENGUARD Gold certified.